Loading the content... Loading depends on your connection speed!

Precautions for Installation of Energy Saving Lamps

1, ventilation should be good. Energy-saving lamp operation will be affected by room temperature, the temperature is too high will make the luminosity decreased, triggering the ignition process will be difficult. Therefore, to avoid the installation in a sealed place, lighting, shade should be well-ventilated, so as not to heat the temperature can not be distributed and continued to rise, affecting energy-saving performance.

t8 led lamp
2, the lamp weight does not exceed the lamp holder load. Energy-saving lamps (especially the old inductive) tungsten bulb than the larger heavier, so switch to energy-saving lamps to pay attention to the size of the lampshade or lighting with. At the same time also pay attention to lampholders, especially multi-bulb-type lighting, can support the light bulb weight. If it is found that the lampholder is loose, it must be replaced or repaired immediately.

3, due to different working principles, can not be directly used for energy-saving lamps dimming system incandescent lamps (such as dimming lamps, etc.). Another special note is that the installation of energy-saving lamps, do not hold the lamp, so as not to cause damage.

Leave a Comment